Schematics inconsistency?
Posted: Mon Dec 26, 2011 10:57 am
R45 is shown as 1K here : http://www.megamanual.com/ms2/pcb.htm
The parts list show it as 10k and this is how DIYAutoTune delivers it.
Ive had to increase this value to over 10k in order to prevent the VR circuit from being "overdriven" with a VR sensor that produces voltages that are too large for the circuit. My MS was behaving as if it was rev-limiting at 3800rpm.
The parts list show it as 10k and this is how DIYAutoTune delivers it.
Ive had to increase this value to over 10k in order to prevent the VR circuit from being "overdriven" with a VR sensor that produces voltages that are too large for the circuit. My MS was behaving as if it was rev-limiting at 3800rpm.