Ok guys good news, I built my megasquirt Ms2 V3 (map daddy duel map)over two years ago, Last week I spent two full days getting the wiring sorted and on Sunday Brum Brum its alive.
Fantastic feeling...
However my question is there a library where I can get base settings for the tables? before using the autotune setting on tuner studios
I am running a 2.0 ltr Zetec on a home made plenum with a single throttle body and four denso side feed 2.25 injectors, edis.
I am using Tech Edge wideband sensor and have the car ticking over and revving on the throttle. But it sounds lumpy and slightly hesatant.
Any assistance greatly appreciated.
Rob
Running and tuning
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Running and tuning
It's usually best just to start with the tables it's running on, and adjust from there.
