Running and tuning
Posted: Fri May 24, 2013 11:47 am
Ok guys good news, I built my megasquirt Ms2 V3 (map daddy duel map)over two years ago, Last week I spent two full days getting the wiring sorted and on Sunday Brum Brum its alive.
Fantastic feeling...
However my question is there a library where I can get base settings for the tables? before using the autotune setting on tuner studios
I am running a 2.0 ltr Zetec on a home made plenum with a single throttle body and four denso side feed 2.25 injectors, edis.
I am using Tech Edge wideband sensor and have the car ticking over and revving on the throttle. But it sounds lumpy and slightly hesatant.
Any assistance greatly appreciated.
Rob
Fantastic feeling...
However my question is there a library where I can get base settings for the tables? before using the autotune setting on tuner studios
I am running a 2.0 ltr Zetec on a home made plenum with a single throttle body and four denso side feed 2.25 injectors, edis.
I am using Tech Edge wideband sensor and have the car ticking over and revving on the throttle. But it sounds lumpy and slightly hesatant.
Any assistance greatly appreciated.
Rob