I am having an on going battle to get the car to run correctly on start up.
Its a 2L16v (9A) VW. I can get it to crank and start, but runs about 19 until it reaches 70 deg. I have no ISV either.
I richen the fuel mix, but it does not seem to help much, then I lean it out thinking that the wide band is seeing far to rich and showing a lean condition.
Man... This is becoming a PITA....
Any ideas?
Cold start
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Cold start
1981 VW Scirocco w Turbo 2L 16v
-
Bernard Fife
- Master Squirter
- Posts: 475
- Joined: Thu Oct 29, 2009 12:54 pm
Re: Cold start
Jm,
It is unlikely anyone can help you if you don't post a datalog of the problem and the MSQ settings file you used in the controller while creating the datalog.
Lance.
It is unlikely anyone can help you if you don't post a datalog of the problem and the MSQ settings file you used in the controller while creating the datalog.
Lance.
"Never wrestle with pigs. You both get dirty and the pig likes it.” - George Bernard Shaw