Hey guys, Sorry I do not have the tune file on this computer but I will post it up tomorrow if needed...
Was playing with a MS2 today and at idle the IGN advance was 17' on the dashboard gauge... When I went into the spark map and edited the values the advance did not change (I highlighted a 3x3 of cells around the idle location on the map) I checked advance was set to be taken from the map not fixed... If I did fix it then it did indeed change the the fixed value that I set.
When I revd the engine the advance changed and followed the map but just not at idle... Is there a setting anywhere for something like if its below "xxxx" rpm or "xxx" map value then its a fixed advance? or what else could cause it not to respond to map adjustments.
Ignition Advance at Idle not changing
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
ReaperCustoms
- MegaSquirt Newbie
- Posts: 22
- Joined: Wed Sep 11, 2013 3:18 am
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Ignition Advance at Idle not changing
Depending on the code, there could be some sort of idle advance settings; a log and MSQ will shed more light on what's going on.
