Hi, I am just trying to get my head around designing my system using a ms1v3 with gsxr itb's and I have been searching for info on using a bosch iacv without much luck. I would be interested on any thoughts folks may have about this.
I read somewhere that with itb's you can forget about iac but then I read about someone fitting it so forgive me but i am a little confused at the moment. Can someone point me in the right direction about which is the best thing to do.
Thanks
Idle control with motorcycle itb's
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Turning Blue
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Dec 03, 2013 12:20 am