Hello everyone,
New to the forum and have a few questions if anyone can find the kindness to help me. Ive read the megamanual and the faq and I have a basic idea of what I need but I was hoping to find someone running a setup similar to mine. Ive got a1993 f-150. Its a 4.9l 300 I6 with speed density (obd1) EFI (12lb injectors) 5spd manual. When I installed the new engine I removed the A.I.R. pump/equipment as well as the EGR. Just looking to see what hardware youre running and if maybe you have a base map to get me running after I make a hardware decision.
anyone running a ford 300 straight 6?
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: anyone running a ford 300 straight 6?
Haven't tuned one myself, but the electronics are similar to our 5.0 Mustang write up.
http://www.DIYAutoTune.com/tech_article ... ng_5_0.htm
http://www.DIYAutoTune.com/tech_article ... ng_5_0.htm
Re: anyone running a ford 300 straight 6?
I'm running a 300 inline Ford 6 in my street rod with a MSII. I set it up like a 5.0L only changing the number of cyl. to 6, 6 squirts per cycle and 14 lb injectors. I've made no changes other than idle speed and it runs fine.
BadShoe Productions, Instructional videos specializing in Ford drivetrains
www.BadShoeProductions.com
www.BadShoeProductions.com