EDIS Module to Chrysler coil wiring
Posted: Tue May 13, 2014 9:59 am
After finding conflicting info and plug wiring colors I would to know if anyone can verify if I have the wiring from the EDIS module to the Chrysler coil pack connector correct. I'd rather only do this once unlike everything else.
I'm connecting as follows:
#10 EDIS pin (yell/blk) to coil pin #2 (gray/red)
#11 EDIS pin (yell/wht) to coil pin #4 (blue/gray)
#12 EDIS pin (yell/red) to coil pin #1(red/yell)
Green/orange from coil plug to 12+, coil pin #3
I have attached a photo of both plugs as well as the project car, a 75 280Z that I'm adding MS and turbo.
Thanks in advance.
I'm connecting as follows:
#10 EDIS pin (yell/blk) to coil pin #2 (gray/red)
#11 EDIS pin (yell/wht) to coil pin #4 (blue/gray)
#12 EDIS pin (yell/red) to coil pin #1(red/yell)
Green/orange from coil plug to 12+, coil pin #3
I have attached a photo of both plugs as well as the project car, a 75 280Z that I'm adding MS and turbo.
Thanks in advance.