Hi all,
I have a question about my coil pack for my 12v VR6 2.8 engine, my stock coil pack work in wasted spark (1-6) (2-5) (3-4) with a 5 pin connector as follow
1- Ground
2- 1/6
3- 3/4
4- 2/5
5- ignition switched
My megasquirt 2 internal wiring is made for an 2.0 8v with a distributor with 1 coil drived by the hall effect sensor
What modification i need to do into my megasquirt to make it work with VR6 coil pack and for my VR sensor to work ??
Thanks a lot
Guillaume
VW VR6 coil pack wiring and VR sensor, 3.57 ms2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
TiGui91racing
- MegaSquirt Newbie
- Posts: 1
- Joined: Sun Apr 05, 2015 1:45 pm
Re: VW VR6 coil pack wiring and VR sensor, 3.57 ms2
For multiple coil driving, you need Extra Code, which is covered by a different forum. Link to it (MSextra) at the top of this page.
If you wish to stick with B&G code, you'd need to use an external ignition system (like EDIS).
If you wish to stick with B&G code, you'd need to use an external ignition system (like EDIS).
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband