Bosch 3 wire ICV adapter board alternatives?

For discussing injector selection,manifold modifications, throttle bodies, fuel supply system design and construction, and FIdle valves and IACs.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Buzzbomb
MegaSquirt Newbie
Posts: 5
Joined: Tue Oct 06, 2015 1:07 pm

Bosch 3 wire ICV adapter board alternatives?

Post by Buzzbomb »

My setup includes the ICV mentioned above, using MS2 3.0 in a BMW with an M30. It looks like the board is setup correctly, minus the ICV control. I was going to use the Glen's Garage adapter board, but that won't happen now. Does anyone have a picture of the same circuit that his board accomplished using the photo area on the 3.0 board, or some other method to include the 3 wire ICV? The setup is also using the DIY relay board, if that makes any difference.
MS2 w/3.0, BMW M30
Post Reply