MSefi.com read only forum (Jan.15,2018)

i done it on MS1Extra with no problem, but this one is confusing me, i just want to control a solenoid or relay (just on-off)
under "Idle Control" i selected Solenoids at 140* i can change my temp on the simulator and my LED on the megasquirt goes on and off as i go higher or lower on temp, but have no responce on the led in the simulator, , dont know what to select on the "Output Port Settings: menu and where does the signal comes out. thanks,

Please post your complete MSQ. I'd like tosee all the settings.

it is a megasquirt 2 , daughterboard. or what do you by MSQ,

An MSQ file is the settings file for your tune. See http://www.megamanual.com/MSFAQ.htm for how to save yours then post as an attachment.