Hi, I have a ms2 v3 and i am having issues with the first start up. When I turn on the key all 3 leds flash and then d14 stays on. I do not seem to have any injector pulse. There is power to the injectors I have tested that and i have ran an injector test with no luck. In tuner studio I have rpm on the gauge when cranking and i also show pulse and duty cycle but it will not start unless you spray starting fluid in it then it will run until that is gone. if some one can point me in the right direction that would be greatly appreciated. i dont have a data log yet but will get one tomorrow.
thanks
mike
d14 led light always on FIXED
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
d14 led light always on FIXED
You do not have the required permissions to view the files attached to this post.
Re: d14 led light always on
Nevermind guys i have solved my own problem. going back over everything in the tune i found thayt i had selected microsquirt instead of ms2.