Toyota Temp Sensor Calibration

For discussing how to choose sensors and create a wiring harness for all Bowling and Grippo versions of the MegaSquirt® EFI controller.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
jamesawooten
MegaSquirt Newbie
Posts: 1
Joined: Tue May 18, 2004 9:22 am

Toyota Temp Sensor Calibration

Post by jamesawooten »

Does anyone have the values that need to be plugged in to Megatune to calibrate the CTS and IAT sensors for stock Toyota products?

Thanks,

Jim Wooten
jcorsaro
MegaSquirt Newbie
Posts: 6
Joined: Fri May 07, 2004 1:09 am
Location: San Diego, CA USA

Post by jcorsaro »

I found this PDF that has the temp/resistance curve for the Toyota coolant/air sensors.

http://www.autoshop101.com/forms/h32.pdf
Jeff in San Diego
MS1 Isuzu Pickup since 03'
MS2 Chevy El Camino since 06'
MS1/extra Suzuki DRZ400 motorcycle in the works
Post Reply