Cold Starts and Ethanol?

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Thomjpster
MegaSquirt Newbie
Posts: 5
Joined: Wed Jul 19, 2006 1:36 pm
Location: Colorado

Cold Starts and Ethanol?

Post by Thomjpster »

It's startingt o get colder, and the old jeep is getting hard to start on e-85.

Are there any tricks you guys are using during the winter?


Thom
'68 Jeepster, '67 Buick 340" w/DIY headers, Th400, Moded V6 Dizzy w/ V8 reluctor & GM 7 pin HEI, 4.3 TBI W/ V8 injectors, V3 MSII, 2.88 code
should be easy, right? LOL
devastator
Experienced Squirter
Posts: 333
Joined: Mon Feb 11, 2008 10:19 am
Location: Kinda near Tucson Arizona

Re: Cold Starts and Ethanol?

Post by devastator »

Most fuel suppliers add less ethanol to the E85, (and gasoline for that matter), mix in the winter to facilitate starting, so that will help a little. My advice is to tune your temp settings in real good.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished. :twisted:
Post Reply