Fuel pump and fuse ??'s
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
luv2trade442
- MegaSquirt Newbie
- Posts: 8
- Joined: Sat Sep 08, 2007 11:02 am
Fuel pump and fuse ??'s
The fuel pump i'm using needs 12 amp. fuse . What are the fuse limits of the relay box? Can i just replace the 10 amp fuse with a 12 and be ok?? THX
1968 Hurst Olds 455
BBK 1000 CFM Tbody
32# Accell injectors
BBK 1000 CFM Tbody
32# Accell injectors
Re: Fuel pump and fuse ??'s
It should be able to handle a 12 amp fuse just fine. Anything over 15, and I would think that you're getting close to the limits though.