Postby proudhon » Thu Oct 08, 2009 9:50 am
I have looked at two companies that have throttle bodies to replace SU carbs.
I am building rebuilding a b20e but I do have a manifold for a pair of SU s to use on the motor
Does anyone have any opinion on replacing the stock fi system with a pair of throttle bodies.
I have also considered using a pair of motorcycle throttle bodies as they are the same size and would be not be difficult to adapt
Any way it goes I'm going to use MS on the system if I keep the stock intake or not.
I'm looking at other "success" stories but all other input is more than welcome
Using a pair of GSXR TB on volvo B20
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Using a pair of GSXR TB on volvo B20
I am considering using a pair of GSXR TB on a volvo B20e
They are about 45mm the same size as The replacements to SU's some of the suppliers sell
The air flow should be ok but I may have to up the injector size
has anyone tried using these.. I've seen other TB used in pairs on smaller 4 cyl but not the GXSR
any reason why not/
thanks
Joe
They are about 45mm the same size as The replacements to SU's some of the suppliers sell
The air flow should be ok but I may have to up the injector size
has anyone tried using these.. I've seen other TB used in pairs on smaller 4 cyl but not the GXSR
any reason why not/
thanks
Joe
-
pascal
- MegaSquirt Newbie
- Posts: 5
- Joined: Mon May 17, 2004 12:26 am
- Location: Germany/Bavaria/Munich
Re: using replacemnet TB on Volvo B20e
It would be interesting to have some links for reference?proudhon wrote: I have looked at two companies that have throttle bodies to replace SU carbs.
Thanks, Pascal
Re: using replacemnet TB on Volvo B20e
Why not ditch ALL of the stock stuff and go with custom all the way around?
MS2 v3.0 pcb, 2.891 firmware w/ flex fuel mod
Ford eDIS-4
1000cc injectors
Saturn 1.9L
....lots of boost with a 50 shot of anti-lag.
Ford eDIS-4
1000cc injectors
Saturn 1.9L
....lots of boost with a 50 shot of anti-lag.