Accel wizard.. MAP vs TP??
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Accel wizard.. MAP vs TP??
I have a stumble off of idle and and its not quite crisp enough.It doesnt "crack" when you hammer it. Its a light Manx style buggy and has a turboed 2332. any things you can steer me to on the megasquirt. I am a little confused aboutwhat TPDdot or Map dot means? anyway acceleration is the problem.
2332 Air-cooled VW, EDIS, Garrett turbo, MSII, 15psi, 1300lb car. : )
-
drmiller100
- Helpful Squirter
- Posts: 37
- Joined: Sun Mar 21, 2010 8:20 pm
Re: Accel wizard.. MAP vs TP??
4 injectors?
one throttle plate?
Intercooler?
does it try to go, then fade off, or does it just cough or stumble? If you run the engine generally richer, does it get better?
one throttle plate?
Intercooler?
does it try to go, then fade off, or does it just cough or stumble? If you run the engine generally richer, does it get better?
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Accel wizard.. MAP vs TP??
Do you have a data log of hammering on it that shows the AFR readings? If so, please post that along with your MSQ. I may have a few pointers.
You can also find some advice for setting up AE at this link:
http://www.megamanual.com/ms2/tune.htm#accel
You can also find some advice for setting up AE at this link:
http://www.megamanual.com/ms2/tune.htm#accel
Re: Accel wizard.. MAP vs TP??
4, 55lb injectors, single throttle body, no intercooler. I was wondering about plenum size. Its mainly off of idle while letting the clutch out. What are you accel settings?
2332 Air-cooled VW, EDIS, Garrett turbo, MSII, 15psi, 1300lb car. : )