dies under load on idle.
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
dies under load on idle.
The car idle and run smooth . The engine is stock chevy 350 tpi. The only thing i having a hard time is the idle when i put it in drive. The torque converter is stock to. The only modies are the tpi intake.
You do not have the required permissions to view the files attached to this post.
Re: dies under load on idle.
You might need to rearrange your rpm bins to give one lower than the idle speed. If that's 700 rpm, make one at 400 or so. And set is so the mixture with that is slightly richer than the normal idle. My car had a factory mod which used a solenoid air valve which opens when you select drive or reverse (controlled by the starter inhibit switch) to bring the idle up to the same as neutral. I kept that when I fitted the MS.
Similar idea as was used for aircon.
Similar idea as was used for aircon.
Dave P, London UK.
Rover V-8
MSII V3
EDIS
Tech Edge Wideband
Rover V-8
MSII V3
EDIS
Tech Edge Wideband