Hi all...
Through this wonderful forum i have discovered that its going to be quite difficult to implement my current 4 phase idle stepper motor on my Rover.
A simple on / off idle solonoid valve will have to suffice.. Can anyone give me any pointers on how this is connected up and what it is connected to and more importantly do i need do have any holes machined on the intake manifold???? - Many Thanks, Scott
Idle valve query
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Why can't you use a PWM IACV?
I think if you live somewhere that the climate is not mild all the time you may find the fast idle solenoid less than satisfactory.
When you do your build it is not difficult to set it up for PWM control of a 2 wire idle control valve.
I think if you live somewhere that the climate is not mild all the time you may find the fast idle solenoid less than satisfactory.
When you do your build it is not difficult to set it up for PWM control of a 2 wire idle control valve.
Don't Talk About It, JUST DO IT!
'93 Toyota P/U 22RE V3.0 MS2/Extra 3.1.2 Full Sequential Spark and Injection
'93 Toyota P/U 22RE V3.0 MS2/Extra 3.1.2 Full Sequential Spark and Injection