Need help sourcing a small throttle body
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Need help sourcing a small throttle body
i cant seem to find a small throttle body out there, i need only a single, around the size as a motorcycle one for a single carb engine i want to efi. engine is only 600cc's and had one inlet about 1-3/4- 2". Thanks for any help or ideas what one i can use.
-
chicksdigwagons
- MegaSquirt Newbie
- Posts: 10
- Joined: Tue Jul 06, 2004 10:27 pm
You might want to consider an EFI snowmobile Throttle body. I've played with them from a 94 Arctic Cat EXT 580. They can be separated and you could use one, or use both of them with a little work to the intake. Built in bosses for injectors is a nice touch. Most automotive throttle bodies are not going to have this. the Wildcat 700 TBs are very simliar but may have a larger bore more suitable for a single application.
Re: Need help sourcing a small throttle body
gm 2.5 4 cylinder tbi - 1 11/16 i'm pretty sure, anywhays its exactly one of the 4.3/v-8 throttle bodies