Hi
I am trying to save myself a bit of leg work . I have a suzuki G10a turbo engine , 3 cyl 1.0 ltr with an electronic carb , electronic timing and knock control . I have just picked it up as a project and have no information on how to wire it up . Its worse than an efi car and I am missing a bunch of teh plugs and wires . Anyway my best bet to get it running is to replace the carb with a TBI . The catch is I would like to keep the air intake section that screws down on the top of the carb with the traditional stalk out the top . Are there any TBI's that have this ? Are there any in the size I would be after , I am guessing one off a 1.5 ish ltr car would be ok . The engine puts out 80 hp stock .
Any ideas welcome before I troll the wreckers .
Thanks
Chris
TBI for 1.0 turbo
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Re: TBI for 1.0 turbo
I would take a look at Geo Metros/swifts and the like. They had TBI set ups on them.