Beginning tuning, need opinions
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
adamtheman16
- MegaSquirt Newbie
- Posts: 4
- Joined: Sat Mar 12, 2005 11:41 am
- Location: Wasilla, Alaska
Beginning tuning, need opinions
I am running Megasquirt 1 with the MS II daughter card on a Ford 300 inline 6 cylinder multiport injection turboed by a TO4B and using EDIS as the ignition. It was originally just EFI with the Megasquirt, no MSII and drove it for a year with no problems. I need some input as to whether my ignition map I've initally setup is a good starting point. I've got it to start and run. I mainly want to know if it looks like a good stating point for a turboed engine, or is there something I have wrong and need to change. Heres the ignition map I have currently.
-
adamtheman16
- MegaSquirt Newbie
- Posts: 4
- Joined: Sat Mar 12, 2005 11:41 am
- Location: Wasilla, Alaska