I am interested in the Mega-Squirt 2, mainly because it seems easier to tune and maintain than an ECM. However, my setup my have difficulties.
My current setup:
TPS
IAC
Injectors
Coolant Temperature
Oil Pressure Gauge
Fuel Pump
Can I run a Mega-Squirt 2 with just that setup? I do not have a VSS and I am not buying an HEI, they don't make them for my engine.....
Can I do this with a Mega-Squirt 2
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0).
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
-
toyotalandfj40
- MegaSquirt Newbie
- Posts: 1
- Joined: Tue Oct 05, 2010 4:54 pm
-
Matt Cramer
- Super Squirter
- Posts: 2951
- Joined: Sat Jul 03, 2004 11:35 am
Re: Can I do this with a Mega-Squirt 2
You'll want an intake air temperature sensor, too, and the MS2 won't talk to the oil pressure gauge (those things generally aren't computer controlled anyway). I'm guessing you have a distributor with a mechanical and vacuum advance? If so, you can start out with having the MS control just fuel, and later install a locked distributor or a crank trigger to get spark.
-
Six_Shooter
- MegaSquirt Newbie
- Posts: 18
- Joined: Wed Aug 18, 2010 6:27 pm
Re: Can I do this with a Mega-Squirt 2
Knowing the vehicle and/or engine would really help.