TPS, MAP and RPM synchronisation

For discussing B&G MS-I/MS-II set-up and tuning of fuel parameters (including idle valves, etc.).
Forum rules
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.

If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.

If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days

The full forum rules are here: Forum Rules, be sure to read them all regularly.
Post Reply
Linzerl
MegaSquirt Newbie
Posts: 9
Joined: Mon May 21, 2007 5:27 pm
Location: Sydney, Australiia

TPS, MAP and RPM synchronisation

Post by Linzerl »

Hi,

Could someone please help me understand why, at 1216.476 in the attached log, TPS and MAP decrease as I take my foot off the throttle, yet RPM increases for the next 300ms? (from 5500 to 5875). All other logs I have seen show TPS, MAP and RPM in Sync. I can't see RPM smotthing effect this, but not too sure what it could be.

running MSII, 2.88 with EDIS-8

Thanks..
You do not have the required permissions to view the files attached to this post.
Megasquirted TVR Griffith
DonTZ125
Experienced Squirter
Posts: 337
Joined: Sat May 16, 2009 1:49 pm
Location: Scarborough, ON
Contact:

Re: TPS, MAP and RPM synchronisation

Post by DonTZ125 »

Not being a COMPLETE wise-acre, but were you perhaps going down a slight hill ... ? :lol:
Linzerl
MegaSquirt Newbie
Posts: 9
Joined: Mon May 21, 2007 5:27 pm
Location: Sydney, Australiia

Re: TPS, MAP and RPM synchronisation

Post by Linzerl »

LOL.. no changing gear..
Megasquirted TVR Griffith
devastator
Experienced Squirter
Posts: 333
Joined: Mon Feb 11, 2008 10:19 am
Location: Kinda near Tucson Arizona

Re: TPS, MAP and RPM synchronisation

Post by devastator »

Your decel kicked in right there. It looks like the RPM matched the PW for the most part.
Sandrail-ACVW 2276 cc, Turbo
MS-II W/spark burning E85
The sand must be punished. :twisted:
Post Reply