TPS, MAP and RPM synchronisation
Read the manual to see if your question is answered there before posting. Many users will not reply if the answer is already available in the manual.
If your question is about troubleshooting, configuration, or tuning, you MUST include your processor type (MS-I or MS-II) and code version in your post. If your question is about PCB assembly or modifications, you must also include the main board version number (1.01, 2.2 or 3.0). For tuning/troubleshooting questions, please attached a datalog and your MSQ file to your post.
If you have questions about MS1/Extra or MS2/Extra code configuration or tuning, please post them at www.msextra.com Such questions posted here will be moved to: a temporary MSextra sub-forum, where they will be removed after 7 days
The full forum rules are here: Forum Rules, be sure to read them all regularly.
TPS, MAP and RPM synchronisation
Could someone please help me understand why, at 1216.476 in the attached log, TPS and MAP decrease as I take my foot off the throttle, yet RPM increases for the next 300ms? (from 5500 to 5875). All other logs I have seen show TPS, MAP and RPM in Sync. I can't see RPM smotthing effect this, but not too sure what it could be.
running MSII, 2.88 with EDIS-8
Thanks..
-
DonTZ125
- Experienced Squirter
- Posts: 337
- Joined: Sat May 16, 2009 1:49 pm
- Location: Scarborough, ON
- Contact:
Re: TPS, MAP and RPM synchronisation
-
devastator
- Experienced Squirter
- Posts: 333
- Joined: Mon Feb 11, 2008 10:19 am
- Location: Kinda near Tucson Arizona
Re: TPS, MAP and RPM synchronisation
MS-II W/spark burning E85
The sand must be punished.
